Q
How to change tyres on Ford Ranger?
When changing the tires on a Ford Ranger, it is essential to first park the vehicle on a flat surface and engage the handbrake. Shift the gear to Park (for automatic transmission) or first gear (for manual transmission). Retrieve the jack, wrench, and spare tire from the vehicle's tool kit. Before using the jack, ensure that the lifting point is located at the designated chassis support point (usually marked with an arrow or a notch) to avoid damaging the vehicle's frame.
Loosen the wheel nuts counterclockwise with the wrench, but do not remove them completely. Gradually lift the vehicle until the tire is approximately 2 centimeters off the ground. Once the nuts are fully removed, take off the old tire. When installing the spare tire, align the wheel bolt holes and hand-tighten the nuts to ensure proper thread engagement. Tighten the nuts in a diagonal pattern until they are preliminarily secured.
After lowering the jack, use the wrench to tighten the nuts in a crisscross pattern to a torque of 110-130 Newton-meters (refer to the owner's manual or tire pressure label on the door frame for specific details). After the replacement is complete, it is advisable to visit a maintenance center immediately to check the torque with a torque wrench. Due to Malaysia's rainy climate, special attention should be paid to checking the tread depth, ensuring it exceeds the legal standard of 1.6 millimeters. The tire pressure should be maintained at 240 kPa for the front tires and 280 kPa for the rear tires when unladen.
If changing the tire in an emergency situation outdoors, it is recommended to keep the vehicle speed below 80 km/h and promptly repair the original tire. Ford authorized service centers offer professional tire balancing and wheel alignment services to ensure driving stability. During the rainy season, upgrading to all-terrain tires to enhance grip in wet conditions is recommended.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.
Latest Q&A
Q
How many gallons of fuel can a Jeep Wrangler hold?
The fuel tank capacity of the Jeep Wrangler varies depending on the model and year. Typically, its fuel tank capacity is approximately 20 gallons.
Q
How to recline the front seats of Jeep Wrangler?
The Jeep Wrangler's front seat folding mechanism typically features adjustment buttons or levers located on the side of the seat. Look for buttons or levers marked with a seat shape and an arrow indicating direction. Simply follow the indicated direction to fold the seat down. While the specifics may vary slightly for different model years and trims, the general operation remains similar.
Q
How deep can a Jeep Wrangler wade through?
The water fording depth of a Jeep Wrangler typically depends on several factors, including the vehicle's configuration, modifications, and driving skills. Generally speaking, a common, unmodified Jeep Wrangler can safely wade through approximately 760 millimeters (30 inches) of water. However, it's crucial to adhere to the manufacturer's specified limits to avoid damaging the vehicle. When fording water, drivers should also carefully assess the flow conditions and the underwater terrain to ensure safe passage.
Q
How many miles can Jeep Wrangler run?
The range of the Jeep Wrangler in Malaysia is affected by various factors such as driving habits, road conditions, vehicle configuration, and the type of fuel used. Generally speaking, its full tank driving range is roughly between 400 and 600 miles. However, it should be noted that this is only a rough range.
Q
What is the difference among models of Jeep Wrangler?
The Jeep Wrangler in Malaysia is primarily available in three variants: Sport, Sahara, and Rubicon. The Sport serves as the base model, equipped with a 3.6L V6 engine (285 horsepower) and a standard four-wheel-drive system, making it suitable for daily use. The Sahara adds luxurious features such as leather seats and a power sunroof. At the top of the lineup, the Rubicon is specifically designed for off-road enthusiasts, featuring a Rock-Trac transfer case, front and rear locking differentials, and electronic sway bar disconnect, along with a higher ground clearance, making it the ultimate choice for serious off-roading.
Different models also vary in chassis strength and suspension systems for off-road capabilities. It is advisable to choose based on your usage needs; the Sport or Sahara is sufficient for city commuting, while the Rubicon is better suited for tackling challenging terrains.
Q
How to open the hood of Jeep Wrangler ?
The steps to open the hood of a Jeep Wrangler are usually as follows: First, find the hood release handle located inside the cabin, usually near the driver's foot area, and pull the release handle. Then walk to the front of the vehicle, find the gap near the emblem or grille of the hood, stretch your fingers in to toggle the internal safety latch, and lift the hood up. However, you need to pay attention to the force and safety during operation.
Q
How to turn on the fog lights of Jeep Wrangler?
To turn on the fog lights of Jeep Wrangler, you can follow these steps: firstly, locate the light control stalk, typically positioned on the left side of the steering column with a distinct symbol of fog lights. Then, rotate or push the fog light switch on the stalk to the accurate position to turn them on. Note that the exact operation may vary depending on the model year and specific vehicle configuration.
Q
Which coolant is suitable for the Jeep Wrangler?
Regarding coolant selection for Jeep Wrangler in Malaysia, it's generally recommended to use high-quality ethylene glycol-based coolant that meets the vehicle manufacturer's specifications and requirements. Common brands such as Mobil and Shell offer suitable products. However, ensure the coolant has appropriate boiling and freezing points to accommodate Malaysia's climate conditions. Additionally, pay attention to the coolant's service life and replacement interval, typically every 2 to 5 years or based on the vehicle's mileage.
Q
What are the different models of Jeep Wrangler?
Common models of Jeep Wrangler in Malaysia include the Sport, Sahara, and Rubicon. The Sport version focuses on practicality, with relatively simple and basic configuration. The Sahara enhances comfort and adds some off-road assistance features. Boasting the oustanding performance of off-road, the Rubicon comes equipped with a more robust 4WD system and professional-grade off-road gear. These models differ in exterior details, interior features, and pricing to cater to diverse consumer preferences.
Q
What's the weight of Jeep Wrangler?
The weight of the Jeep Wrangler can vary depending on the specific configuration and model. Generally speaking, the weight of common versions is around 1900 kilograms.
Related Q&A
Q
How to replace the side mirror glass of Ford Ranger?
To replace the side mirror glass of Ford Ranger, firstly ensure that you have the correct replacement glass for this model. Then prepare the necessary tools like screwdrivers, etc. Carefully disassemble the housing of the side mirror, usually there will be several securing screws, unscrew the screws and lightly remove the housing. Next, you will see the parts that connect the glass, carefully loosen the fasteners and remove the old glass. When installing the new glass, ensure it is correctly aligned and securely fasten all the connecting parts, and finally reinstall the housing and tighten the screws. It should be noted that you need to handle the parts with care during the operation process to avoid damage.
Q
How to play music in Ford Ranger?
To play music in your Ford Ranger, you can use several common methods. First, connect your mobile device via Bluetooth - simply pair your phone with the vehicle's Bluetooth system, then you can play music from your phone through the car's audio system. Alternatively, if your vehicle has a USB port, you can insert a USB drive containing music files, and the system will automatically recognize and play them. Additionally, if your Ranger is equipped with a CD player, you can insert music CDs for play. Please note that specific operations may vary slightly depending on your vehicle's configuration and model year.
Q
How to replace the brake light bulb of Ford Raptor?
To replace the brake light bulb of Ford Ranger, first open the vehicle's trunk and find the corresponding brake light. Then carefully remove the fixing screws or clips of the lampshade, and take it off. Next, gently rotate and pull out the old brake light bulb, insert the new bulb correctly and ensure it is securely installed. Finally, reinstall the lampshade and the fixing screws or clips. Be careful not to damage the bulb and related components during the operation.
Q
What's the weight of Ford Ranger?
The weight of the Ford Ranger varies depending on the vehicle configuration and specific version. Generally, the common weight of Ford Ranger is approximately between 1800 and 2200 kilograms.
Q
What type of fuel does 2011 Ford Ranger require?
The 2011 Ford Ranger typically uses 5W-30 or 10W-30 grade fuel. However, the specific type of fuel to use depends on factors such as the vehicle's mileage, driving environment and condition. Generally speaking, synthetic fuel provides better protection and performance for the vehicle, but the cost is relatively high. Mineral fuel, on the other hand, is more economical. It is recommended that you select the appropriate fuel according to the maintenance manual of the vehicle.
Related News

Reviewing the Ford Ranger: The Dual Advantages of Rugged Appearance and Powerful Performance
Kevin WongApr 21, 2025

"Starting from RM 170,888! Detailed Explanation of Ford Ranger's Configuration and Performance, a Synonym for Practicality and Versatility?"
AshleySep 20, 2024

Ford Ranger: A Safe, Reliable, and Economical Choice of Pickup
LienMay 2, 2024

Ford Unveils “Simulated Manual Transmission” Patent to Reignite Driving Pleasure in Electric Vehicle
LienApr 2, 2025

Ford Focus will cease production in 2025, shifting strategic emphasis towards electrification
Kevin WongMar 10, 2025
View More