Q

how to jump start proton x70

To jump-start a Proton X70, first ensure that the engines of both the rescue vehicle and the Proton X70 are turned off. Then, connect one end of the red jumper cable to the positive terminal (marked with a "+" sign) of the rescue vehicle's battery, and the other end to the positive terminal of the Proton X70's battery. Next, connect one end of the black jumper cable to the negative terminal (marked with a "-" sign) of the rescue vehicle's battery, and the other end to a metal part of the Proton X70, ensuring that the connection point is away from the battery and not covered by paint. After making the connections, start the rescue vehicle and let it run for a few minutes. Then, attempt to start the Proton X70. Once the Proton X70 starts successfully, carefully remove the jumper cables in the reverse order.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.

Latest Q&A

Q
How to check power steering fluid in Suzuki Swift?
To check the power steering fluid in Suzuki Swift, you can follow these steps. First, open the engine hood and find the power steering fluid reservoir, which usually has a clear indicator easy to find. Check the scale line on the reservoir to check whether the fluid level is within normal range, it should be between the upper and lower scale lines. If the fluid level is low, it's necessary to add the specified type of power steering fluid. Take note to avoid any impurities when adding. During the inspection, also observe the color and condition of the fluid, the normal power steering fluid should be transparent or light yellow, and free of impurities and strange odors. If the fluid has a deep color, strange odour, or impurities, it might imply that the fluid needs to be replaced.
LeafyBranchLeafyBranchApr 27, 2025
Q
What's the specification of the engine of Suzuki Swift?
The Suzuki Swift is commonly equipped with an engine displacement of 1.2 liters or 1.4 liters. The specific engine specifications may vary due to different model years and configurations.
JoyfulMelodyJoyfulMelodyApr 27, 2025
Q
What's the weight of the Suzuki Swift?
The weight of the Suzuki Swift typically ranges from 900 to 1100 kilograms, depending on the model configuration and version. Different configurations may differ in the materials and equipment of some parts, thus affecting the overall weight of the car.
RonRonApr 27, 2025
Q
How much horsepower does the Suzuki Swift produce?
The horsepower of the Suzuki Swift typically varies depending on the specific configuration and model, with common versions producing around 100 horsepower.
TonTonApr 27, 2025
Q
What is the fuel consumption of the Suzuki Swift?
The fuel consumption of the Suzuki Swift varies depending on the specific model, engine configuration, and driving conditions. Generally speaking, common versions consume about 6 liters per 100 kilometers in city driving, and about 5 liters on the highway. However, actual fuel consumption may be influenced by a variety of factors including driving habits, road conditions, and vehicle load.
SonSonApr 27, 2025
Q
What is the tire pressure of Suzuki Swift?
The tire pressure of Suzuki Swift typically ranges between 2.2 and 2.5 bars. However, the exact figure can vary depending on factors such as the specific model of the vehicle, tire specifications, vehicle load, and driving conditions. In general, you can find accurate information about tire pressure of your specific model in the vehicle's user manual.
BuddyBuddyApr 27, 2025
Q
How many setas does the Suzuki Swift have?
The Suzuki Swift is usually a five-seater model.
WildfireWildfireApr 27, 2025
Q
Where is the fuse box of Suzuki Swift?
The fuse box of Suzuki Swift is typically located under the dashboard on the driver's side or in the engine compartment. The fuse box under the driver's side dashboard may require the removal of some coverings to be found; the one in the engine compartment usually have clear markings. However, the specific location may vary slightly depending on the model and production year.
HealerHealerApr 27, 2025
Q
How to replace the wiper blades of Suzuki Swift?
In Malaysia, to replace the wiper blades of Suzuki Swift, first lift up the wiper blades, press the button at the connector, and pull the old wiper blade outwards. Then align the interface of the new wiper blade with the slot, insert and secure it, ensuring that the installation is firm. It is important to choose wiper blades suitable for the Suzuki Swift model, and be careful not to damage the vehicle parts during the operation.
ZonZonApr 27, 2025
Q
How to check the transmission fluid of Suzuki Swift?
The method to check the transmission fluid of Suzuki Swift is as follows: First, park the vehicle on a flat ground and make sure the engine is off and has been cooled down. Next, open the engine hood and find the transmission dipstick, pull it out and wipe it clean. Then, reinsert the dipstick and pull it out again, observe the scale on the dipstick, the fluid should be between the upper and lower scales. If the fluid turns black or has a strange smell, it may need to be replaced. It should be noted that there may be slight differences in different years and configurations of Suzuki Swift.
NonNonApr 27, 2025

Related Models

Related Q&A

Q
how to change time on proton x70
To change the time on the Proton X70, the process is typically as follows: First, locate the settings option on the vehicle's control panel, then navigate to the time setting function. Usually, you can adjust the hours and minutes using buttons or the touchscreen. However, please note that the specific steps may vary slightly depending on the configuration of the Proton X70.
MoonlightNightCalmMoonlightNightCalmFeb 26, 2025
Q
how to reset proton x70 tyre pressure
To reset the tire pressure on the Proton X70, you can typically follow these steps: First, ensure the vehicle is stationary and the power is on. Then, locate the tire pressure-related settings option on the vehicle's control panel or information display. Once you access this option, there may be a "Reset" or "Re-calibrate" button; pressing this button will complete the tire pressure reset. However, please note that the specific steps may vary slightly depending on the model year and configuration of the Proton X70.
GopGopFeb 26, 2025
Q
proton x70 how many cylinder
The Proton X70 is typically equipped with a four-cylinder engine.
HueHueFeb 26, 2025
Q
what engine does proton x70 use
The Proton X70's 1.5L engine is a 1.5L TGDI engine. It is paired with a 7-speed DCT transmission, delivering a maximum horsepower of 174 hp and a peak torque of 255 Nm. Compared to previous versions, the fuel efficiency has improved, achieving up to 7.3L/100KM.
PopPopFeb 26, 2025
Q
how to install youtube in proton x70
Installing YouTube on the Proton X70 may involve violating relevant laws, regulations, and the vehicle manufacturer's guidelines. Generally, the original multimedia system of the vehicle does not support the installation of unauthorized applications. It is recommended that you comply with local laws and vehicle usage rules and refrain from attempting such unauthorized operations to avoid affecting the vehicle's warranty and normal usage.
JoyJoyFeb 26, 2025

Related News